Stainless Steel


Stainless Steel

Stainless steels are iron alloys with a minimum of 10.5% chromium. Other alloying elements are added to enhance their structure and properties such as formability, strength and cryogenic toughness. These include metals such as nickel, molybdenum, titanium, and copper. The main requirement for stainless steels is that they should be corrosion resistant for a specified application or environment. The selection of a particular “type” and “grade” of stainless steel must initially meet the corrosion resistance requirements. Additional mechanical or physical properties may also need to be considered to achieve the overall service performance requirements.

STAINLESS STEEL
Grade Condition Shape Size range in mm Density
17-4 PH Solution annealed Round Bars OD14mm – OD280mm
Flat Bars 8mm to 118mm thickness max. width 250mm 7.800
H900 Round Bars 30mm -70mm
H1025 Round Bars 19mm – 180mm
Flat Bars 25mm – 100mm thickness max. width 250mm
H 1075 Round Bars 12.70mm – 180mm
H 1150 Round Bars 25mm – 280mm
Flat Bars 25mm thickness max. width 250mm
H 1150 2x Round Bars 19mm – 100mm
Flat Bars 25mm & 118mm thickness max. width 250mm
PLATES/SHEET 8mm thickness onwards width 1000-1500, length 1500mm – 9000mm
AISI 316/316L -/- Flat Bar 18mm – 84mm thickness max. width 250mm 7.980
Round bar OD14mm – OD280mm
PLATES/SHEET 8mm thickness onwards width 1000-1500, length 1500mm – 9000mm
AISI 303 -/- Flat Bar 112mmx 15mm x 3000mm max. width 250mm 7.900
Round Bar 12.7mm – 25.40mm
AISI 416 Q&T Round Bar OD 20mm – OD 250mm 7.800
Flat Bar 15mm – 100mm thicknes max width 250mm
AISI 430F Q&T Round Bar OD 20mm – OD 200mm 7.800
Flat Bar 15mm – 80mm thicknes max width 250mm
AISI 410 Q&T Round Bar OD 20mm – OD 160mm 7.800
Flat Bar 15mm – 60mm thickness max. width 160mm
Top